MON123 Vertical Pressure Steam Sterlizer(Digital Display automation)

0 Reviews

Category:

l .Fully stainless steel structure 2.Hand wheel type of quick-open door structure 3.Door safety lock system 4.Digital display of working status,touch of key 5.Auto discharge the cool air,and steam discharging auto matically after sterilization 6.Over temperature&over pressure auto-protection 7.Safe protection of water lacking 8.Self-inflating type seal 9.Automatically shut off with beep reminding after sterilization 10.Used for sterilization of medical instruments, medical cotton products. 11.Fully stainless steel SUS304/AISI 304 -3mm 12.Possible to install drying system according request

technical data LS-35HD LS-50HD LS-75HD LS-100HD
Chamber volume 35L(φ318×450)mm 50L(φ340×550) mm 75L(φ400×600) mm 100L(φ440×650) mm
working pressure 0.22MPa
Working temperature 134℃
Max working pressure 0.23 Mpa
Heat average ≤±1℃
Timer 0~99min or 0~99hour59min
Adjustment of temperature 105~134℃
Power 2.5Kw/AC220V.50Hz 3Kw/AC220V.50Hz 4.5Kw/AC220V.50Hz
Overall dimension 450×450×1010(mm) 510×470×1130(mm) 560×560×1120 (mm) 540×560×1250 (mm)
Transport dimension 570×550×1150(mm) 590×590×1280(mm) 650×630×1280(mm) 680×630×1370(mm)
G.W/N.W 72Kg/56Kg 88Kg/ 68Kg 100Kg/ 80Kg 110Kg/ 85Kg

In Stock

Description

l .Fully stainless steel structure
2.Hand wheel type of quick-open door structure
3.Door safety lock system
4.Digital display of working status,touch of key
5.Auto discharge the cool air,and steam discharging auto matically after sterilization
6.Over temperature&over pressure auto-protection
7.Safe protection of water lacking
8.Self-inflating type seal
9.Automatically shut off with beep reminding after sterilization
10.Used for sterilization of medical instruments, medical cotton products.
11.Fully stainless steel SUS304/AISI 304 -3mm
12.Possible to install drying system according request

Reviews

There are no reviews yet.

Be the first to review “MON123 Vertical Pressure Steam Sterlizer(Digital Display automation)”

Your email address will not be published. Required fields are marked *